Amazon.com Gibson’s best-selling SG Standard shatters all perceptions of what an electric guitar can–and should–be. The slim, lightweight mahogany body; unmistakable twin cutaways, pointed horns and beveled edges; the fastest neck in the business; a pair of Gibson’s screamin’ humbucker pickups–all irresistible features coveted by some of the greatest guitar players of all-time. Various SG models have been played on-stage by the likes of Pete Townshend, Angus Young, Tony Iommi, Robby Krieger, Chris Robinson, Alex Lifeson, Derek Trucks, Elliot Easton, Jim James, Jeff Tweedy, Moby, Keith Urban, Nick Jonas, Rocco DeLuca. When will you add your name? Solid Mahogany Body Probably the most central of all SG features is its solid mahogany body. The mahogany goes through the same rigorous selection process as all of Gibson’s woods, and is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the factories. Inside the Gibson factories, humidity is maintained at 45 percent, and the temperature at 70 degrees. This ensures all woods are dried to a level of “equilibrium,” where the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, and controls the shrinkage and warping of the woods, in addition to reducing the weight. It also improves the woods’ machinability and finishing properties. Consistent moisture content means that the SG will respond evenly to temperature and humidity changes long after it leaves the factory. Gibson’s 490R and 498T pickups give you the tonal characteristics of an original PAF, but with a slight increase in upper mid-range response. The more traditional ’50s neck profile–found on the SG Standard–is the thicker, rounder, more time-honored profile, emulating the neck shapes of the iconic late ’50s Gibson models. Gibson Tune-o-Matic bridge with stopbar tailpiece. Set-Neck Construction Like all classic Gibson guitars, the necks on Les Pauls and SGs are distinguished by one of the more traditional features that have always set them apart–a glued neck joint. Gluing the neck to the body of the guitar ensures a “wood-to-wood” contact, no air space in the neck cavity, and maximum contact between the neck and body, allowing the neck and body to function as a single unit. The result? Better tone, better sustain, and no loose or misaligned necks. 22-Fret Rosewood Fingerboard Rosewood has always graced the fingerboards of the world’s finest stringed instruments, including many of today’s Gibsons. The fingerboards on Gibson SGs are constructed from the highest grade rosewood on the planet. The rosewood is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the factories to be fitted onto the neck of the SG Standard. The resilience of this dense and durable wood makes these fingerboards extremely balanced and stable, and gives each chord and note unparalleled clarity and bite. The 12-inch radius of the fingerboard provides smooth note bending capabilities and eliminates “dead” or “choked out” notes, common occurrences on fingerboards with lesser radiuses. Exquisite Mother-of Pearl and Acrylic Inlays Among other key distinctions, the SG Standard stands out from its no-frills kid sister, the SG Special, because of the fine mother-of-pearl Gibson logo and holly inlays that decorate its headstock. The SG Standard also boasts figured acrylic trapezoid inlays along its rosewood fingerboard. Gibson’s 490R and 498T Pickups The mid to late 1960s saw the emergence of a very different type of music coming from the clubs of England. This new genre’s players were demanding more powerful amplifiers with increased volume outputs to satisfy their sonic explorations. This led to a call for a more versatile pickup, and Gibson answered the call with the 490T and 490R pickups (“T” for treble, and “R” for rhythm), humbuckers with the tonal characteristics of an original PAF, but with a slight increase in upper mid-range response. The Gibson 498T bridge pickup is the 490’s ideal complement. Taking the 490 one step further, the 498 swaps the Alnico II magnet to an Alnico V, thus making it slightly hotter with emphasis on mid-ranges and highs. The pole pieces on the 498T are also aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck. Tune-O-Matic Bridge The Tune-o-matic bridge was the brainchild of legendary Gibson president Ted McCarty in 1954. At the time, it was a true revelation in intonation, and set a standard for simplicity and functionality that has never been bettered. This pioneering piece of hardware provides a firm seating for the strings, allowing the player to adjust and fine-tune the intonation and string height in a matter of minutes. It also yields a great union between the strings and body, which results in excellent tone and sustain. It is combined with a separate
Features
- Mahogany neck with bound 22-fret rosewood fingerboard and acrylic trapezoid inlays
- Gibson 490R (neck) and 498T (bridge) humbuckers with three-way toggle, independent tone/volume
- Gibson Tune-o-Matic bridge with stopbar tailpiece
- Grover Kluson-style green-key tuning machines
- Solid mahogany body with set-neck construction
Reviews
There are no reviews yet.