NOYITO MPU9250 6500 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module IIC SPI

Manufacturer’s two-year after-sale warranty Specifications: On-board pull-up resistors on SDA, SCL, and nCS On-board pull-down resistors on FSYNC and AD0 3-Axis Accelerometer Range: up to +- 16 g Sensitivity: up to 16,384 LSB/g 3-Axis Gyroscope Range: up to +- 2000 degree/sec Sensitivity: up to 131 LSB/degree/sec 3-Axis Magnetometer Range: +- 4800 mT Sensitivity: 0.6 mT/LSB Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator Interface: I2C 2C Address: 0x68 by default, 0x69 if AD0 is pulled high Board Dimensions: 25.5mm (1.004″) long x 15.4mm (0.606″) wide, 3mm (0.118″) inside diameter of mounting holes Weight: 2.72g (0.096oz) Pakcage Included: 1pcs MPU9250 Module

Features

• This module MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP).
• The MPU-9250 also with an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an on-board 3.3V voltage regulator allowing you to power the module from 5V sources. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator.
• Power supply: 3-5V (internal low dropout regulator),
• Communication: standard IIC communication protocol .
• [(Manufacturer’s two-year after-sale warranty)] Built-in 16bit AD converter, 16-bit data output
• NOYITO MPU-9250 Test Code Schematic Document https://1drv.ms/u/s!AlzQUCOyZQhKgVYzDavgr5yu6Wwk?e=4zwnDg