Shurtape Colored Masking Tape (CP-631): 3/4 in. x 60 yds. (Red) / non-branded, white core

Shurtape CP-631 Colored Masking Tape is an economical general purpose tape for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating and identification. The tape is flexible and is resistant to water, oil, and solvents; and provides excellent adhesion and release from a variety of substrates. Shurtape CP 631 has multiple uses for home, school, and industry. This colored masking tape has a crepe paper backing and is coated with a thermoplastic synthetic rubber adhesive. Please note Shurtape phased out their CP-632 masking tape product and replaced it with their CP-631 product. The specifications for both tapes are very close and CP-631’s specification numbers are now displayed for this product. Country of Origin: United States.

Features

• Economical general purpose tape for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating and identification. The tape is flexible and is resistant to water, oil, and solvents; and provides excellent adhesion and release from a variety of substrates. Shurtape CP-631 has multiple uses for home, school, and industry. This colored masking tape has a crepe paper backing and is coated with a thermoplastic synthetic rubber adhesive.
• NOTE: Shurtape phased out their CP-632 masking tape product and replaced it with their CP-631 product. The specifications for both tapes are very close and CP-631’s specification numbers are now displayed for this product. Manufactured in the U.S.
• Tape rolls are typically cut to standard tape industry metric-cut sizes – or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
• Adhesive: synthetic rubber. Carrier/Backing: crepe paper. Thickness: 4.9 mils (carrier, adhesive). Adhesion: 34 ounces per inch (to stainless steel test panel)
• Tensile Strength: 20 pounds per inch (longitudinal). Service/Operating Temperature: 60degF to 150degF. Elongation: 9%. Standards Met: ASTM D 6123/D 6123M-97 (2012), Type I; meets Consumer Product Safety Commission requirements through conformance with ASTM D-4236. Core: 3 inch diameter