Alphastat Table Mat Grounding Kit – Universal Snap Kit and 15′ 1 Meg Male Low Profile Ground Cord

Features

• TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020.
• THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375″ thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station.
• EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet
• MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
• Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station.