This data patch panel is able to connect eight Ethernet lines to eight ports on your internet router. The wires are ran to this module and terminated. Simply add patch cables from the RJ45 jacks on this module straight to your router. This is best way to keep all of those wires neat and clean. Tech Tip: Remember, data terminals run independently and can’t be split without a switch. Data terminals are unlike telephone terminals, as the telephone terminals run parallel and can be split to more than one jack. Standard 110 This panel uses the industry standard 110 punch terminals which are color coded and simple to use. Be sure to not use any other type of tool other than the 110 punchdown, as it could damage the terminals. Wiring Box Mountable Since the high performance design is geared to fit most wiring enclosures, placement is simple. In the event your installation requires slight modifications, custom compatibility pins are included. Use these pins when you need to match the mounting pattern of other enclosures and/or equipment. If necessary, you can easily mount the splitter to a wall. Just remove the small tabs from the frame, place where you need it, and screw it in. Be sure to consider the routing of your wires in order to place the module in the best and most efficient manner.
Features
- Able to connect (8) Ethernet lines to (8) ports on your internet router | Keeps wires neat and clean
- Wires are run to the data patch panel and terminated – simply add patch cables from RJ-45 jacks
- Standard 100 punch terminals which are color coded & simple to use | ONLY use 110 punchdown tool to avoid damage
- Wiring box mountable – high performance design to fit most wiring enclosures | Custom compatibility pins included to match enclosure mounting patterns
- Expand your capabilities by using 8 conductor Cat5e UTP cable
Reviews
There are no reviews yet.