DIG 1/2″ compression tee, drip irrigation fitting with .700 OD, for a three-way layout of polyethylene drip tubing, Bag of 15

Compression fittings are the most common drip fittings used in the installation of drip irrigation systems. Constructed of molded ultraviolet-resistant high impact plastic, DIG’s compression tees fittings are designed to fit polyethylene drip tubing and drip line with .700 OD to .704 OD and use on any drip irrigation installation. DIG’s drip irrigation compression fittings are available in a variety of configurations such as elbows, couplings, end caps and others to complete the installation.

Features

• The compression fittings use a simple wrist action; the polyethylene drip tubing “walked” into the fittings for a very tight fit with no tools, glue, or clamps required.
• The .700 OD compression tee with black inserts fits DIG’s drip tubing and all other brands with.700 OD. DIG highly recommends installing a 25 PSI pressure regulator at the water source to protect the drip system. If the drip tubing or drip line have a smaller OD, such as 1/2″ (16 mm) with .630 OD, do not use the .700 OD tee.
• Maximum operating pressure of up to 60 PSI.
• Made with high impact UV resistant plastic.