Essential Oil Distillation Kit Lab Distillation Apparatus 500ml Distillation Apparatus Lab Glassware Kit

Rose Pure Dew Refining 1. Prepare 100g/3.5oz of rose petals and 200ml/6.76oz of water ( if you want to extract more concentrated dew, you can add more petals with less water), then put it into a container, add a little salt, and stir them. 2. Use a match (not included) to light the alcohol lamp and wait a few minutes (the alcohol lamp will heat more slowly) for the water to boil and the roses to lighten in color. 3. Distillation of steam into the condenser tube tail pipe outflow, pure dew production success. Essential Oil Refining 1. Check if the funnel is leaking. 2. Pour the mixed liquid into the funnel, place the funnel on the iron ring and let it stand. 3. Open the piston of the separating funnel, then open the cork so that the lower liquid (water) is released from the lower end of the separating funnel, and close the cork when the oil-water interface is tangent to the top of the cork. 4. Use the glass dropper to remove the essential oil. Specification Color: Clear Flask Capacity: 500ml/16.9OZ Assembly Required: Yes Material: High Borosilicate Glass, Iron, Rubber, Latex Conical Flask, Funnel, and Beaker Capacity: 100ml/3.38OZ High-temperature Resistant: Less Than 350degC/662degF Gross Weight: 3.2kg/7lbs Net Weight: 2.8kg/6.2lbs Latex Pipe Length: 1.5m/5FT Package Size: 43.5*32*22.5cm/17.13*12.6*6.35in Package Included 1*Serpentine Condenser Tube 1*Pear Shaped Dispensing Funnel 1*Thermometer 1*Cow Horn Tube 1*Beaker 1*Conical Flask 1*Glass Dropper 1*Distillation Flask 1*Iron Stand 2*Essential Oil Bottles 1*Alcohol Lamp 1*Brush All Accessories Needed for Installation Notes 1. Before using the product, please fix the base of the iron stand with nuts, then adjust the position of the ten stand and iron clamps, and connect the distillation flask and the condenser tube. 2. The position of the sink should be higher than the plane of the condenser pipe, and then inject about 30ml water from the water inlet pipe with a syringe inside the condenser pipe. 3. Connect the latex tube conduit, and loosen the outlet latex tube stop clip, the water will automatically flow out (siphon phenomenon principle). 4. Please note that the position of the mercury ball in the thermometer should be at the same level as the bottom of the nozzle, and the liquid in the distillation bottle should not exceed 2/3 volume or be less than 1/3 volume. 5. The heating temperature shall not exceed the boiling point of the highest material of the mixture. 6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.

Features

• MULTI-FUNCTION:This distillation equipment enables you to easily separate liquid mixtures, measure the boiling point of pure compounds, purify and distill, and perform many other experiments to meet laboratory needs
• DETACHABLE DESIGN:This product includes a serpentine condenser for vertical continuous distillation or reflux and an easily controllable pear shaped distribution funnel, allowing you to easily complete professional experiments. Detachable distillation equipment makes cleaning and storage more convenient
• DURABLE MATERIALS:The glassware in this kit is made of high-quality borosilicate glass, while the iron frame is made of high-quality iron. The product is carefully packaged in cardboard boxes and grooved sponges to avoid damage during transportation
• ACCURATE MEASUREMENT:This product is equipped with a glass dropper, thermometer, and high transparency glassware with transparent scales, allowing you to accurately control dosage, measure temperature, and observe experimental changes
• HIGH-CAPACITY:This product includes a flask with a capacity of 500 ml/16.9 ounces, a beaker with a capacity of 100 ml/3.38 ounces, a separating funnel, and a conical flask. The circular bottom allows heat to be more evenly distributed in the liquid