Ximimark 2Pcs Current to Voltage Converter Module 0/4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Conversion Conditioning Board

Instructions for use: The module is wired as defined, and the supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V). After power-on, the D2 light should be on, otherwise check the line connection. The board is reversely protected, and the reverse connection does not burn. When the current input is at the minimum value (0 mA or 4 mA), adjust the ZERO potentiometer to make the VOUT output the minimum value (0.0V or other voltage). When the current input is at the maximum value (20mA), adjust the SPAN potentiometer to make the VOUT output the maximum (3.3V or 5V or 10V, when the input is 4-20ma, the output can be as small as 2.5V). According to your needs, select the appropriate range through the jumper cap: 4–20ma: 0–2.5V range: J1 1, 2 feet shorted, 3, 4 feet shorted 0–3.3V range: J1 1, 2 feet are disconnected, 3, 4 feet are disconnected 0–5.0V range: J1 1, 2 feet shorted, 3, 4 feet shorted 0–10.0V range: J1 1, 2 feet shorted, 3, 4 feet disconnected 0–20ma: 0–3.3V range: J1 1, 2 feet shorted, 3, 4 feet shorted 0–5.0V range: J1 1, 2 feet shorted, 3, 4 feet shorted 0–10.0V range: J1 1, 2 feet shorted, 3, 4 feet disconnected Note: The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully! Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Includes: 2Pcs