Adeept Smart Car Kit(Compatible with Arduino IDE), Line Tracking, Obstacle Avoidance, OLED Display, Ultrasonic Sensor, IR Wireless Remote Control, DIY STEM Educational Robot Car Kit

Important Tips: This kit is loose pieces, you need to assemble it yourself! Lessons: 0001 Adjust the initial angle of the servo 0002 Assemble 001 Introduction of Adeept Robot Control Board 002 Building the Arduino Development Environment 01 Onboard LED 02 Servo Motor 03 Control the Servo through PCA9685 04 How to Control a DC Motor 05 Buzzer 06 Control the RGB LED 07 WS2812 RGB LED 08 Measure Distance 09 Light Tracing 10 Line Tracking 11 OLED Display 12 Control the 16×8 LED Matrix 13 Get battery level infomation 14 IR Remote Control 15 IR Remote Control Car 16 WiFi Remote Control Car 17 Remote Control by Computer 18 Line Tracking Car 19 Light Tracing Car 20 Obstacle avoidance and automatic following Package List: 1 Set Structure Parts(Acrylic) 1x Adeept Robot Control Board(Based on MEGA328P, fully compatible with Arduino IDE) 1x OLED Display 1x ESP8266 WiFi Module 1x Ultrasonic Module 1x 3-CH Line Tracking Module 1x Light Tracing Module 1x IR Remote Control 1x 16×8 LED Matrix Module 1x WS2812 RGB LED Module 2x Adeept RGB LED Module 3x Servo Motor 2x TT Motor 2x Front Wheel 2x Rear Wheel 4x F624ZZ Bearing 4x F687ZZ Bearing 1x Battery Holder 1x Type-C USB Cable Other Necessary Accessories(Cables, Nuts, Screws, Copper Standoffs, Nylon Standoffs, Tools, etc.)

Features

• This Smart Car Kit is designed for teens to learn to coding, building and robotics. It is developed based on MEGA328P, and it is fully compatible with Arduino IDE. It is the best choice for learning programming and robotics.
• Easy to Assemble and Build – Detailed tutorials(320 Pages, 22 Lessons) and complete code are provided. The download link can be found on the card in the box (Paper tutorials are NOT available as the tutorials are updated frequently).
• Multiple Control Methods – Wireless remote control by IR remote control; Remote controlled by Android APP.
• Multiple Functions – IR/Wi-Fi remote control; Obstacle avoidance; Line tracking; Light Tracing; OLED display; 128 pixel LED dot matrix display; Dual 10mm RGB LED turn signal; Extended WS2812 RGB LED light strip.
• Control Board with Charging – Adeept Robot Control Board integrates an 8.4V battery charger, allowing you to directly charge the battery through the Type C interface without the need to purchase an additional charger.