Cole-Parmer Stuart Analog Melting Point Apparatus; 230 VAC

Take melting point measurements of up to three samples at once for greater efficiency. Easy-to-follow instructions are printed directly on the unit. Place your sample in a capillary tube and insert it into the aluminum block. Manually set the heating rate between 1degC and 20degC per minute, up to a maximum of 250degC. Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading. Observe the sample through the magnifying lens until the melt occurs and read the melt temperature from the thermometer. Apparatus is supplied with open-ended capillary tubes. One end should be sealed with a Bunsen burner; or purchase optional capillary tubes separately that are already sealed. Order the optional brass cooling plug to speed up cooling when multiple runs are needed. Specifications Display: 1deg to 20degC per minute (variable) Heat Up Time: 50 Min Temperature: 50/60 Power Hz: Glass Thermometer Temperature Sensor: Analog Melting Point Apparatus, 240 VAC Description: 37 Universal Guarantee: 14.5 Width (cm): 14 Width (in): 5.5 Depth (cm): 11 Depth (in): 250 Height (cm): 4.375 Max Temperature C: 3 Height (in): 230 Noof Samples Power VAC

Features

• Integral LED illumination and magnifying lens make viewing easy
• Simple to use–place sample in capillary tube, set heating rate, and watch for melt
• Test and view three samples at the same time
• Heat up to 20degC/min close to melt temperature then set to slower heating rate of 1deg to 10degC/min
• Included blue-spirit-filled glass thermometer is mercury-free and nontoxic