Generic FY6900 DDS Signal Generator, 60MHz Frequency Meter Counter, 250MSa/s Double Channel Function Generator, Arbitrary Waveform, High Precision, LCD Display with Graphics

$128.29

This signal generator allows students to conduct advanced experiments in electronics and physics by creating and analyzing electrical waveforms.

Generic FY6900 DDS Signal Generator, 60MHz Frequency Meter Counter, 250MSa/s Double Channel Function Generator, Arbitrary Waveform, High Precision, LCD Display with Graphics
Generic FY6900 DDS Signal Generator, 60MHz Frequency Meter Counter, 250MSa/s Double Channel Function Generator, Arbitrary Waveform, High Precision, LCD Display with Graphics
$128.29

[wpforms id=”1190″ title=”true” description=”Request a call back”]

Features – Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals – The standard 3-pin power plug increases the grounding protection and effectively eliminates the leakage current on the BNC terminal – 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and graphics of the two channels at the same time – Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits – Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations – Standard dual full functional channels which are equivalent to two independent generators. – Channel SYNC Function: Support waveform copy and state copy between channels – Precisely adjust the phases of the two channels, Precision can be 0.01deg – Minimum amplitude resolution can be up to 1 mV. Amplitude range is 0~20Vpp – Duty-cycle of each channel can be adjusted independently0.01%-99.99%, the adjusting resolution is 0.01% -10V~+10V DC Offset function; Resolution 0.001V – Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuited Specifications – Material: ABS – Model: FY6900 – Supply Voltage: AC100V~240V – Sine: 0~60MHz – Square: 0~25MHz – Ramp, Triangle: 0~10MHz – Pulse: 0~10MHz – TTL/CMOS: 0~10MHz – Arbitrary Waveform: 0~10MHz – Min. pulse width: 20ns(All m – Accuracy: +-20ppm – Stability: +-1ppm/ 3hours – Amount (Save & Load): 20 – Position (Save & Load): 01 to 20 (01 for start default value) – Type: USB to Serial interface – Communicating Speed: 9600bps (Industrial standard) – Protocol: Command line mode, providing communication protocols. Package Content – 1 x Signal Generator – 1 x USB Cable – 1 x Power Cable – 1 x BNC-BNC Cable – 2 x BNC-Clip Cable

Features

  • DDS-based signal generator (Direct Digital Synthesizer) offers high stability, high precision, and low distortion
  • Frequency generator features a 2.4″ TFT color LCD display to show parameters and graphics of the two channels at the same time
  • Function generator has a built-in high D/A converter chip to provide high anti-interference, sampling rate of 250MSa/s, vertical resolution of 14bits
  • Signal generator can sweep 4 properties of signals (frequency, amplitude, offset and duty cycle), and has 2 sweep types (linear and logarithm), sweep time of 0.01S~999.99s, and up/down/roundtrip sweep directions
  • Signal generator can be used independently or controlled via computer host software, providing 3 windows – waveform window, text window, and control window

Reviews

There are no reviews yet.

Be the first to review “Generic FY6900 DDS Signal Generator, 60MHz Frequency Meter Counter, 250MSa/s Double Channel Function Generator, Arbitrary Waveform, High Precision, LCD Display with Graphics”

Your email address will not be published. Required fields are marked *