New head gaskets, nuts and washers. Both seals the PTO side and flywheel side, gasket for crankcase breather, and ring for oil gallery in the pan with sealer.and two sets of piston rings compatible with Kohler 24-108-15, 24-108-15-s, original bore 83mm + .008″ standard, 1.5mm rings, style These rings are slightly oversized. You will need these rings if your bore and piston are in good shape and you want a tighter ring gap. Used in these kohler engines: ch25, ch26, ch730, ch735, ch740, ch745, ch750, cv25, cv26, cv724, cv725, cv730, cv740, cv745, cv750, lh755, lh775, sv710, sv715, sv720, sv725, sv730, sv735, sv740, sv810, sv820, sv830, sv840. Please measure your piston ring thickness before ordering, if your rings measure 1.2mm these piston rings will not work These rings are not made in China or Taiwan Kohler standard ring sets, 25 108 15-s, standard bore, fits 83 mm bore +.008″ engine, 725cc & 747cc, style a, 1.5 mm top ring thickness, 2510801-s Original standard bore is 83mm, 725cc 747cc used in ch25, ch26, ch730, ch735, ch740, ch745, ch750, cv25, cv26, cv724, cv725, cv730, cv740, cv745, cv750, lh755, lh775, sv710, sv715, sv720, sv725, sv730, sv735, sv740, sv810, sv820, sv830, sv840 Note: There are 2 different ring thicknesses on the engines listed above, please measure the top ring thickness to ensure the correct rings before ordering. Note: Please look at your piston to make sure you have style [a] Piston which requires 1.5mm thick top ring
Features
- Complete gasket and seal set with two Sets Of Piston Rings Compatible with Kohler Engines CH25, CH26, CH730, CH735, CH740, CH745, CH750 and others. These rings are .008 oversized and designed for pistons that are less worn and you need a tighter ring gap.
- Replaces Kohler Part# 24-108-15-s And 2410815s
- Please Look At Your Piston To Make Sure You Have Style [A] Piston Which Requires 1.5mm Thick Top Ring
- Visit .amazon/lilredbarn for all of your small engine needs
- PLEASE READ DESCRIPTION BEFORE ORDERING
Reviews
There are no reviews yet.