Overview The USB-TO-LoRa-HF is a wireless data transfer unit with USB interfaces based on the SX1262 module. Adopts LoRa Modulate and Demodulate technology, with the advantages of anti-interference and long-distance communication (up to 5KM). Supports point-to-point, point-to-multipoint, relay network, AES, etc. Compact size and easy to install, suitable for the wireless data transmission and device control of industry standard or non-standard user protocol Features Adopts LoRa Modulate and Demodulate technology, anti-interference and long-distance communication Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions Supports LBT sending, RSSI output, AT command configuration AES communication to ensure data transmission security Supports multi-level relay networking to increase the wireless communication distance Supports host configuration and firmware upgrade (support firmware customization for batch order) Comes with Online Development Resources and Manuals: bit.ly/4bBBHR5 Specifications Appearance Interfaces: USB Type A SMA-KE female connector: 6dBi omni-directional antenna x 1 Enclosure : ABS case Dimension: 56.40 x 18.40 x 12.52mm Wireless Parameters Frequency Band: 850~930MHz Signal Modulation: LoRa Encryption Type: AES128 Emit Power: +22dBm Max Reception Sensitivity: -148dBm SERIAL Parameters Baud Rate: 1200 ~ 115200bps Parity Bit: None, Odd, Even Data Bit: 8 ~ 9 bits Environmental Requirement Operating Temperature : XTAL version: 0 ~ 50degC Humidity Range: 5% ~ 95% relative humidity Package Content USB-TO-LoRa-HF-B x1 x1 Antenna (850~930MHz) x1
Features
- XTAL Crystal Oscillator: The USB-TO-LoRa-HF-B version is 850~930MHz frequency for Europe, America and Oceania. And it uses XTAL crystal oscillator and is recommended to be used in 0~50degC temperature
- The USB-TO-LoRa-xF is a wireless data transfer unit with USB interfaces based on the SX1262 module. Adopts LoRa Modulate and Demodulate technology, with the advantages of anti-interference and long-distance communication (up to 5KM). Supports point-to-point, point-to-multipoint, relay network, AES, etc. Suitable for data acquisition in industry and agriculture
- The LoRa Spread Spectrum Technology: Compared to traditional communication, LoRa Chirp Spread Spectrum (CSS) and Frequency Hopping Spread Spectrum (FHSS) technologies greatly improve the performance of long-range communication and anti-interference, widely used in military and industrial communication fields
- Multiple communication methods:Can Be Set Via Software: Stream transfer mode, Packet transfer mode. Relay Networking)] The radio station can realize multi-level relay networking, suitable for ultra long-range distance or complex environment networking communication, allows multi networking on the same region
- AT Command Mode:Users can query the current status of the module or set parameters by sending AT commands. AES Communication:The secret key is writable but unreadable, the devices with the encrypted transmission enabled and the same key can communicate with each other normally for greater security
- Listen Before Talk (LBT):The module will actively monitor the environmental noise of the channel before sending. If the noise exceeds the threshold, the sending will be delayed. This function can improve the communication success rate of the module in harsh environments, suitable for networking transmission and anti-collision processing
- Receive Signal Strength Indication (RSSI): Supports serial port output of data packet signal strength, can be used to evaluate signal quality, improve communication network, and measure distance. Supports serial port output of environmental noise signal strength, can be used to manually realize LBT function
- Actual test environment: Sunny weather with an open field, 22dBm emit power, airspeed 0.3kbps, 6dBi magnetic CB antenna, 3m antenna height, 5km distance
Reviews
There are no reviews yet.